Add a device to FlowMesh

A Wanflow Cloud Gateway can join a FlowMesh network in your organization directly from the gateway admin console, with no separate client to install.

Before you start, make sure that:

1. Choose a mesh network service and join

Sign in to the device as described in Sign in to the gateway admin console, go to FlowMesh in the left navigation, and open 概览 (Overview).

Under 加入组网 (Join mesh network), choose the mesh network to join from the 组网服务 (Mesh network service) drop-down. The list shows each mesh network’s plan, whether it’s available, and the number of devices used and in total. Once you’ve chosen one, click 加入 (Join).

2. View mesh status

组网状态 (Mesh status) shows how the device is doing in the mesh network:

FieldDescription
状态 (Status)The device’s connection status. Before the device joins, it shows 需要登录 (Login required)
IP 地址 (IP address)The device’s mesh IP address
主机名 (Hostname)The device’s name in the mesh network
DNS 后缀 (DNS suffix)The domain suffix used for device names in the mesh network. See DNS and device names
节点 (Nodes)The number of nodes in the mesh network
加密 (Encryption)The encryption status of the mesh connection

Once it joins, the device appears with the type 万联云网关 (Wanflow Cloud Gateway) in the device list on the mesh network management page in the console.

3. View mesh traffic

The 组网流量 (Mesh traffic) chart shows the traffic the device sends and receives over the mesh network. You can switch between average and peak values and between time ranges of 1 hour, 24 hours, 7 days and 1 month.

节点 (Nodes), 高级配置 (Advanced settings) and 安全信息 (Security info) on the left contain more mesh-related information and settings.