enFlowMeshOverview

FlowMesh

FlowMesh connects computers, phones, Wanflow Cloud Gateways and servers in different locations to a single encrypted private network. Devices communicate using mesh IP addresses; when network conditions allow, they connect peer-to-peer (P2P) directly, otherwise traffic is forwarded through a cloud relay.

Choose how to connect based on the device:

  • Computers and phones: install the Wanflow client app (Windows, macOS, iOS, Android).
  • On-site networks: connect through a Wanflow Cloud Gateway. Devices behind the gateway that can’t run a client can be reached through subnet routes.
  • Linux servers and OpenWrt routers: use the open-source FlowMesh client (program names flowmesh / flowmeshd). Source code and documentation are on GitHub.

Features and workflows are not exactly the same on every platform. See Platforms and clients.

Get connected

Manage and configure

What you want to doGuide
Choose how to connect a computer, phone or serverPlatforms and clients
Install the client on a Linux serverInstall the Linux client
Install the client on an OpenWrt routerInstall the OpenWrt client
Manage auth keys, tags and access rulesAccess and access control
Reach devices in the office that don’t have a client installedSubnet routes
Send a device’s internet traffic through a specific nodeExit nodes
Reach services by device nameDNS and device names
Check whether traffic uses a direct connection or a relayDirect connections and relays
Share a local web or TCP service with mesh network membersShare local services

Troubleshooting and reference

Connect two devices first, then enable routing, DNS or service sharing one at a time, so you can tell whether each step works.